Pallet Support Bars, Metal Support Bars, Pallet Supports





Comments:

Pallet Rack Heavy Duty Crossbars

Pallet supports bars are designed to connect over the pallet rack step beam of a pallet rack system to support the bottom of load and reinforce the system as a whole. They can be either flanged or waterfall style. Our friendly staff can help you with the different types.

The amount of supports to be used for each pallet load will depend on the weight of the loads and size of your pallet rack system. Although teardrop style pallet racks does not require hardware on its assembly, it is recommended the use of Tek screws to locked crossbars in place.

Heavy Duty 42" Pallet Support Bars

Heavy Duty 42" Pallet Support Bars
Galvanized pallet support bars 14 Gauge 2500 Lbs capacity per pair.

Specifications:

  • 6,000+ available
  • Galvanized 14 gauge steel
  • 2,500 Lbs capacity per pair
  • 42" long x 3" wide x 1-5/8" deep
  • Outside waterfall connection

Used Metal Pallet Support Bars, in Stock in San Diego

Used Metal Pallet Support Bars in Stock
See table below for quantities,sizes and close-up pictures.

Used Metal Pallet Support Bars
Standard 1-1/2" Step Beams and Structural Channel Beams

Item Length Frame Type Color
A 54" 54" Waterfall/Roll Formed Grey
B 48" 48" Waterfall/Structural Grey
C 48" 48" Waterfall/Structural Grey
D 48" 48" Waterfall/Roll Formed Grey
E 38" 42" Inside Flush/Roll Formed
Slotted
Orange
F 36" 36" Waterfall/Roll Formed Grey
G 37" 36" Waterfall/Structural Grey
H 33.25" 36" Inside Flush/Roll Formed Orange
I 21.25" 24" Inside Flush/Roll Formed Orange
See pictures below for quantities,sizes and close-up pictures.

Metal Support Bars (Type A, B, and C in Above Table)

Types of Pallet Support Bars
See table above for quantities and sizes.

Metal Support Bars (Type D, E, and F in Above Table)

Types of Pallet Support Bars
See table above for quantities and sizes.

Metal Support Bars (Type G, H, and I in Above Table)

Types of Pallet Support Bars
See table above for quantities and sizes.

Wood Pallet Support Bars, 2" x 4" or 2" x 6" Douglas Firs

Wood Pallet Support Bars 2 x 6 Douglas Fir
Rack system using lumber support bars.

3/4" Metal Support Bars

 Metal Pallet Support Bars with Particle Board
Partcicle board available.

Support Particle Board, Plywood, or Other Lumber Decking

 Metal Pallet Support Bars with Particle Board
3/4" metal support bars with lumber decks will usually end up "flush" with the top of a standard 1-1/2" step beam.

Metal Support Bars for 3/4" Small Step Beams
Can be used to Support Particle Board or Lumber Decks

Height Length Frame Type Color
3/4" 50" 54" Inside Flush Blue
3/4" 44" 48" Inside Flush
Heavy Duty
Green
3/4" 44" 48" Inside Flush Blue
3/4" 32" 36" Inside Flush Blue
3/4" 26" 30" Inside Flush Blue
3/4" 19" 23" Inside Flush Blue
Call for Pricing.

Current Customers in California:

San Diego County, Imperial, Riverside, Orange County, San Bernardino, Los Angeles County, Ventura, Santa Barbara, San Luis Obispo, Monterey,
Santa Cruz, San Mateo, San Francisco, Santa Clara, Alameda, Contra Costa, Solano, Napa, Marin, Sonoma, Sacramento, Fresno, Marced, and Kings.

Free Online Link Exchange Program

Keep updated on our material handling news page. We have partnered with preferred material handling vendors to provide quality solutions.
We offer a free online link exchange program with companies providing products or services in our industry.

We accept all major credicards