Height Gauge – When loading a pallet, the operator knows that if the load is high enough to clear the safety stop, then the pallet will not prematurely move the awaiting cart.

Strip-Off Stop – If, after placing a pallet, the operator has his forks in an improper tilt position, the safety stop will catch the bottom of the pallet and "strip" it off his forks.

End Stop – The safety stop, which is situated on the lowest cart and protrudes 3/4" above the highest cart, prevents pallets from shifting beyond the front load beam.

Push Plate – Pushing on the plate with the last pallet being inserted into the lane ensures proper placement on the rails as well as guaranteeing safe clearance of the cart.

Lane Full Indicator – The operator can tell if a lane is full by the absence of the safety stop. If it is not showing at the front, the last cart has been loaded and there is a pallet on the rails – a full lane.

Hannibal utilizes a welded, high strength, tubular rail system. The tubular rails prevent food and other debris from being caught within the system. This solution provides continuously smooth rolling action as well as a cleaner environment, ideal for food and beverage storage.

Further, Hannibal’s rails conform to the strict ASTM-A513 specification for straightness, dimension and surface condition, far outpacing the loose tolerances of structural components. Our tubular rails offer an economic strength to weight ratio and are produced in our own factory, providing a sma

Carts are linked when extended, eliminating the possibility of single pallet hang-ups. Without this feature, it would be possible for a pallet to become temporarily lodged at the back of a lane, release, and travel in an uncontrolled manner to the load end, spilling the load.

The resultant potential for damage to product, and more importantly, personal injury, is obvious. No pushback product is complete without this important safety feature.

Our pushback has a lower profile than other cart type systems. This allows for extra lift clearance and may even mean the difference of an extra level.

Hannibal’s 3-6 deep wheels are manufactured from solid steel and are equipped with heavy duty bearings. Sturdy 5/8” shafts are welded / bolted to the carts and are oversized to withstand shock loading, capacities of up to 1,400 lbs. per wheel.

Each cart comes equipped with lift-out protectors, which prevents accidental dislodgement of a cart by the fork lift operator. Follow this link to see a photo of a custom designed pushback pallet rack system.