Los Angeles - 714-500-0632
Used Rapid Rack Boltless Shelving, California
Used Rapid Rack Boltless Shelving
Industrial Shelving - In Stock, Ready for Will Call or Delivery.
This high quality shelving is manufactured here in the USA at Rapid Rack Industries in California. Boltless shelving is easy to assemble and available in 3-10 beam levels, or more if required.
This is the heavy duty industrial grade shelving, not the cheap stuff from China. Both the angle posts and the beams are powder coated with a gray finish. Other colors available.
Our used inventory is partially reconditioned and is in good structural integrity. We can fully recondition the boltless shelving at an additional cost, and can also provide all new materials. New and used industrial particle board is available, depending on the shelf size and our current inventory.
Used Industrial Shelving (many sizes available)
Light to heavy weight industrial boltless shelving storage units. 150 - 600 pounds per level.
- 12" to 48" deep available.
- 36" to 72" wide available.
- Heights up to 180" tall available.
- Particle board, wiremesh, and metal decks available.
Call our sales department for pricing and availability at:
619-255-1428 San Diego Office.
Used Rapid Rack Boltless Shelving
5 Levels with DRBLP at middle levels
Medium to heavy duty industrial storage units. 500 pounds per level, non seismic
- 48"W x 24"D x 84"H
- 5 shelf levels with particle board.
Many other sizes available. Call for pricing.
Single River Beam (SRB)
Single Rivet Beams (SRB) are for light to medium weight industrial storage applications. Rapid Rack's SRB are 15/16" high, 14 gage, and can be used as left to right and front to back shelf supports.
Double Rivet Beam, Low Profile (DRBLP)
Double Rivet Low Profile Beams (DRBLP) are for heavy duty industrial storage applications. Rapid Rack's DRBLP are 1-1/8" high, 11 gage, and can be used as left to right and front to back shelf supports.
Double Rivet 'Z' Beam (DRBZ)
Double Rivet 'Z' Beams (DRBZ) are for medium to heavy weight industrial storage applications. Rapid Rack's DRBZ are 2-3/16" high, 14 gage, and can be used as left to right and front to back shelf supports. Z beams protects the edges of the wood shelves.
Double Rivet 'Z' Beam (DRBZ) Fully Wrapped
Fully wrapped DRBZ storage units are used to increase the weight capacity and provide additional protection for the wood shelves.
Double Rivet Beam (DRB)
Double Rivet Beams (DRB) are for medium to heavy duty industrial storage applications. Rapid Rack's DRB are
2-11/16" high, 14 gage, and can be used as left to right and front to back shelf supports.
Tie Supports (TS)
Tie supports are used to stabilize beams and add support to the decking. They bolt between DRB, DRC, or DRCHD and are used for heavy duty shelving over 24" deep and wider than 48".
Channel Beams provide the highest capacity available for boltless shelving. Please call for more info.
Tie Plates (TP)
Tie supports are used to stabilize beams and add support to the decking. They bolt between DRB, DRC, or DRCHD and are used for heavy duty shelving over 24" deep and wider than 48".
Heavy Duty Angle Post (APH)
Heavy Duty Angle Post (APH) are used for maximum weight capacity. Rapid Rack's APH are 1-7/8" x 1-7/8", 14 gage, and are punched on 1-1/2" centers for shelf adjustment. Heavy duty angle posts can be used in mezzanine and shelf supported catwalk storage systems.
Contact our sales department for additional information, pictures, prices, lead times, and a request for quote (RFQ). C&SS is servicing all California with sales offices in San Diego and the San Francisco bay area. Call us at 619-255-1428.
San Diego County, Imperial, Riverside, Orange County, San Bernardino, Los Angeles County, Ventura, Santa Barbara, San Luis Obispo, Monterey,
Santa Cruz, San Mateo, San Francisco, Santa Clara, Alameda, Contra Costa, Solano, Napa, Marin, Sonoma, Sacramento, Fresno, Marced, and Kings.
