Interlake Pallet Rack, California

Format: XXX-XXX-XXXX

Product Type:
Comments:

Interlake Pallet Rack

Interlake pallet racks are an industry standard. Interlake steel corporation was established in 1964. Their influence in the material handling industry been key in the fundamental development of pallet racks, drive in/drive thru, mezzanines, bulk storage, and cantilever rack.

Used pallet racks, Interlake teardrop upright new style
Used pallet racks, Interlake teardrop upright new style.
Used pallet racks, Interlake teardrop upright old style
Used pallet racks, Interlake teardrop upright old style.

Used Interlake Pallet Racks

Check out our Used Material Handling Equipment page for great discount prices on used Interlake pallet racks and other warehouse equipment.

(1) Maximum unsupported length is measured from the floor to the top of the first beam or the maximum beam spacing (whichever is greater). (2) For beam lengths over 108" used with 025, and 027 frames, reduce capacity by 7.0% (0.93 multiplier).

NOTES:

  • Upright capacities are for product load plus dead load (dead load = 2.0% of product load).
  • Capacities are per the 1997 RMI and 1996 AISI specifications.
  • Load factors are 1.4 for the product load and 1.2 for dead load.
  • Capacities are only valid when used with Interlake published beam sizes.
  • Capacities are not valid for free standing framed that have an H/D ratio greater than 6.0 where H is the distance from the floor to the top of the top beam and the D is the upright depth.
  • Capacities are for static load only.

These capacities assume that all component parts used are (1) manufactured by Interlake, (2) in good condition, and (3) properly installed.

We always have a large supply of used material handling equipment in stock including racking, industrial shelving, and many other products.

Used pallet racks, Interlake teardrop upright old style
Seismic footplates on used pallet racks, Interlake teardrop upright old style.

Interlake Upright Frames - General Information

The following information is on Interlake's Roll Formed Selective Pallet Rack Frames:

There are eight basic Interlake frame models in varying sizes and gauges. Baked vista green enamel is standard finish. Models 025 and 027 are 3" x 1-5/8"; 075, 077 and 079 are 3" x 3"; and 095 and 099 are 4" x 3".

Used pallet rack beams, Interlake old style 3 pin connection
Used pallet rack beams, Interlake old style 3 pin connection.

Interlake Beams - General Information

Interlake pallet racks are an industry standard. Interlake steel corporation was established in 1964. Click here to learn more about Interlake pallet rack beams.

Current Customers in California:

San Diego County, Imperial, Riverside, Orange County, San Bernardino, Los Angeles County, Ventura, Santa Barbara, San Luis Obispo, Monterey,
Santa Cruz, San Mateo, San Francisco, Santa Clara, Alameda, Contra Costa, Solano, Napa, Marin, Sonoma, Sacramento, Fresno, Marced, and Kings.

We accept all major credicards